New platform
RAT-DC
20 Nm smart quarter-turn
- BACnet MS/TP & Modbus RTU
- Valve Signature™ built in
- Optional supercapacitor failsafe
RIFT Sensor Hub™: go beyond valve position
An intelligent asset can tell you much more than open or closed. The Sensor Hub brings field measurements into the same system as the actuator, so you can see the circuit or pipeline the valve serves.
Adds flow, differential pressure, temperature, leak and environmental sensing around the valve.
Understand the cooling circuit or pipeline, not just the valve.
- Flow
- Differential pressure
- Temperature
- Leak detection
- Soil moisture
- Environmental sensing
RIFT Sensor Hub™ in practice
Field data, timestamped
The Sensor Hub is designed to collect, timestamp and buffer additional field information so it can be viewed alongside valve movements.
Built around the application
Flow and differential pressure for cooling loops; soil moisture and temperature for irrigation; leak detection for plant rooms and chambers.
Confirm the outcome
Sending a command does not prove the expected flow was achieved. Pairing actuator data with flow or pressure closes that loop.
Part of the RIFT system
The Sensor Hub is a system layer on RIFT’s development roadmap. Talk to us about pilot applications.
Every layer adds context to the last
Layer 1
Actuator
Controls the valve and measures every movement.
Explore Layer 2Valve Signature™
Every movement compared with its commissioning baseline.
Explore Layer 3Valve Condition Index™
A simple condition state any BMS can read.
Explore Layer 5RIFT Portal™
Asset health, trends and service planning for the fleet.
ExploreWhere RIFT Sensor Hub™ makes the difference
Data centre cooling
CDU distribution, bypass, isolation and rotary mixing valves in liquid-cooled and hybrid facilities.
Explore
Water & wastewater (AMP8)
Treatment works, pumping stations, reservoirs and networks — low-power actuation for remote assets.
Explore
Commercial buildings & HVAC
Chilled and heating water isolation, bypass and rotary control valves in plant rooms and risers.
ExploreExplore the RIFT range
From 1.5 Nm to 14,000 Nm — SMART, electric and pneumatic actuators, all designed and supported from Bournemouth.
SMART 
RAS SMART
10–30 Nm
- IP67 protection as standard
- Bluetooth set-up from Android devices
- On/off or 4–20 mA modulating control
SMART 
RAM SMART
40–100 Nm
- Part-turn and multi-turn configurations
- IP67 for harsh environments
- Built-in touchpads for set-up
SMART 
RAL 300 SMART
100–300 Nm
- IP68 enclosure as standard
- Positioning accuracy to 0.1°
- 12–30 V DC for solar & battery sites
SMART 
RAL 600 SMART
300–600 Nm
- Up to 600 Nm output
- IP68 enclosure as standard
- AC or DC supply
Electric 
RPE
20–5,000 Nm
- 20–2,300 Nm direct drive
- 4,000 & 5,000 Nm gearbox versions
- IP67 standard, ATEX options
Electric 
RSE
50–1,200 Nm
- 50–1,200 Nm multi-turn
- IP65 standard; IP67, IP68 & Ex d options
- 4–20 mA standard control
Electric 
RQE
30–2,000 Nm
- 30–2,000 Nm output
- IP67, NEMA 4 & 6
- Lightweight: 2.1–14.5 kg
Electric 
RFT
20–100 Nm
- 20–100 Nm geared drive
- Quiet, stable operation
- 12/24 V DC or 230 V AC
Electric 
RXW
2–6 Nm
- WRAS-certified valve bodies
- Integrated manual override
- Wide voltage range
Pneumatic 
RSD
Scotch yoke
- High break-out torque
- Ideal for butterfly valves
- Quarter-turn on/off
Pneumatic 
RSS
Scotch yoke
- Fail-closed spring return
- High break-out torque
- Ideal for butterfly valves
Pneumatic 
RRD
Rack & pinion
- Linear torque output
- Compact body
- Quarter-turn
Pneumatic 
RRS
Rack & pinion
- Fail-safe spring return
- Linear torque output
- Compact body
See RIFT Sensor Hub™ on your valves
We’ll walk you through the data model, BMS points and how condition states fit your maintenance process.
Call the engineering team+44 (0) 1202 162457 Emailsales@riftactuators.com
Head officeUnit 6-7, 11-15 Francis Ave, Bournemouth BH11 8NX, UK